Nuevo

Pc123 Dil-4 Optoacoplador

en 6 cuotas de

Precio sin impuestos nacionales:

Lo que tenés que saber de este producto

Unidades por pack: 1
Cuenta con 4 pines.
Posee un voltaje de aislamiento de 5kv.

Ver características

Ir a la compra

Características del producto

Marca	Genérica
Modelo	dil-4
Formato de venta	Unidad

Tipo de encapsulado	dil-4
Voltaje de aislamiento	5kv
Voltaje máximo de funcionamiento	70V
Corriente máxima	50 mA
Ancho de banda	80 kHz
Cantidad de pines	4
Temperatura máxima de funcionamiento	100 °C
Altura	7 mm
Ancho	4,5 mm
Largo	6 mm

Descripción

PC123 Series
- Description PC123 Series contains an IRED optically coupled to a phototransistor. It is packaged in a 4-pin DIP, available in wide lead spacing option and SMT gullwing lead form option. Input output isolation voltage (rms) is 5.0kV. CTR is 50% to 400% at input current of 5mA.
- Features
1. 4-pin DIP package
2. Double transfer mold package (Ideal for Flow Soldering)
3. Current transfer ratio (CTR : MIN. 50% at IF=5 mA, VCE=5V)
4. Several CTR ranks available
5. Reinforced insulation type (Isolation distance : MIN. 0.4mm)
6. Long creepage distance type (wide lead-form type only : MIN. 8mm)
7. High isolation voltage between input and output (Viso(rms) : 5.0 kV) DIP 4pin Reinforced Insulation Type Photocoupler
- Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC123)
2. Approved by BSI, BS-EN60065, file No. 7087, BSEN60950 file No. 7409, (as model No. PC123)
3. Approved by SEMCO, EN60065, EN60950, file No. 204582 (as model No. PC123)
4. Approved by DEMCO, EN60065, EN60950 (as model No. PC123)
5. Approved by NEMKO, EN60065, EN60950, file No. P03100205 (as model No. PC123)
6. Approved by FIMKO, EN60065, EN60950, file No. 19383 (as model No. PC123)
7. Recognized by CSA file No. CA95323 (as model No. PC123)
8. Approved by VDE, VDE0884 (as an option) file No. 83601 or No. 134349 or No.40005304 (as model No. PC123)
9. Package resin : UL flammability grade (94V - 0)
- Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different potentials and impedances
4. Over voltage detection

Sin garantía